Power Management; Product Disposal - IBM T-120 User Manual

Power Management

If your computer has
previously been used with a
CRT monitor and is currently
configured to a display mode
outside the range that the Flat
Panel monitor can display, you may
need to re-attach the CRT monitor
temporarily until you have
re-configured the computer,
preferably to 1600 x 1200 at 60Hz.

Product Disposal

22
To benefit from power management, the monitor must be used in
conjunction with a computer that implements the Video Electronics
Standards Association (VESA) Display Power Management Signalling
(DPMS) Standard.
The power management feature is invoked when the computer recognizes
that you have not used your mouse or keyboard for a user-definable
period. There are several states as described in the table below.
®
As an ENERGY STAR Partner ,IBM has determined that this product
meets the ENERGY STAR
For optimal performance, switch off your monitor at the end of each
working day, or whenever you expect to leave it unused for long periods
during the day.
Power
State
Indicator
Steady green
On
Power
Amber
saving
* There may be a slight delay before the picture reappears.
The fluorescent lamp in the liquid crystal display contains mercury.
Dispose of it as required by local ordinances and regulations.
®
guidelines for energy efficiency.
Restoring
Screen
Operation
Normal
Press a key or
Blank move
mouse. *
Compliance
the E S
NERGY TAR®