Menu Options - Chauvet Q-Wash 260-LED Quick Reference Manual

Menu Options

st
1 Level
INTRO
INVERT
RANGE
SPECIAL
EDIT
1st Level
EDIT (Cont.)
EXTRA
Programming Levels
ADDRESS 001~512 Selects a starting DMX address
RESET NO/YES Resets the product's custom settings
HIGH Select the fan's operation mode.
NORMAL
NOTE: Fixture's controller will force the fan to High if the
FANS
LOW product's internal temperature becomes too high, despite any
manual or DMX setting
AUTO
Selects DMX running mode
DMX512
AUTO1 Selects the first automatic program
AUTO2 Selects the second automatic program
CUSTOM Selects the user customizable program
RUN
SOUND1 Selects the first sound program
Selects the second sound program
SOUND2
Selects the Slave running mode
SLAVE
TEST Starts the product's test sequence
BASIC Selects the 11-channel DMX mode
CHANNELS
ADVANCED Selects the 15-channel DMX mode
Turns off the display after 60 seconds
60 CLOSE
DISPLAY
Keeps the display on
BRIGHT
KEYLOCK NO/YES Activates/deactivates the control panel password
DIMMER 4~1 Slow (DIM 4) to fast (DIM1) dimmer curves
DIMMER
DIMMER 0 Linear dimmer
Shows the version of the installed S/W
INFO EDITION
PAN Defines the pan direction
NORMAL/
TILT Defines the tilt direction
REVERSE
DIMMER Defines the direction of the dimmer fader
USE NO/YES Activates the changes
Sets the pan start point (restricted range)
P/START
P/FINISH Sets the pan end point (restricted range)
T/START 000~255 Sets the tilt start point (restricted range)
T/FINISH Sets the tilt end point (restricted range)
USE Activates the changes
Activates the move-in black delay (3 s)
BLACKD NO/YES
The DMX controller can reset the product
DMX
RESET
SYSTEM The control panel can reset the product
LEDs illuminate at normal or high intensity
NORMAL/
POWER NOTE: The product will return to Normal if the internal
HIGH
temperature becomes too high
UC White output matches that of older products
White output set by RGB-W
COLOR RGBTOW
White output defined by RGBW faders
OFF
The DMX controller can set the fan speed
DMX
FAN
SYSTEM The control panel can reset the fan speed
In case of lost DMX signal, the product will remain in its current
SAVE
DMXERROR state
In case of lost DMX signal, the product will blackout
BLAK
Selects the program step
STEP
Selects the pan position
PAN
000~255
TILT Selects the tilt position
SPEED Selects the pan/tilt speed
Programming Levels
RED
GREEN Combines red, green, blue, and white to obtain a custom color
BLUE
Selects the dimmer value
DIMMER 000~255
Selects the strobe frequency and mode
STROBE
DIMSPEED Selects the dimmer speed
TIME Selects the step duration
USE NO/YES Activates the changes
PASSWORD **** Opens the Extra menu (see below)
Page 7 of 11
Q-Wash 260-LED QRG
Description
Description