Menu Options - Chauvet Q-Wash 260-LED Quick Reference Manual

Q-Wash 260-LED QRG

Menu Options

st
1 Level
INTRO
INVERT
RANGE
SPECIAL
EDIT
1st Level
EDIT (Cont.)
EXTRA
All manuals and user guides at all-guides.com
Programming Levels
ADDRESS 001~512 Selects a starting DMX address
RESET NO/YES Resets the product's custom settings
HIGH Select the fan's operation mode.
NORMAL
NOTE: Fixture's controller will force the fan to High if the
FANS
LOW
product's internal temperature becomes too high, despite any
AUTO manual or DMX setting
DMX512 Selects DMX running mode
Selects the first automatic program
AUTO1
Selects the second automatic program
AUTO2
Selects the user customizable program
CUSTOM
RUN
Selects the first sound program
SOUND1
SOUND2 Selects the second sound program
SLAVE Selects the Slave running mode
TEST Starts the product's test sequence
BASIC Selects the 9-channel DMX mode
CHANNELS
ADVANCED Selects the 12-channel DMX mode
60 CLOSE Turns off the display after 60 seconds
DISPLAY
Keeps the display on
BRIGHT
Activates/deactivates the control panel password
KEYLOCK NO/YES
Slow (DIM 4) to fast (DIM1) dimmer curves
DIMMER 4~1
DIMMER
Linear dimmer
DIMMER 0
INFO EDITION Shows the version of the installed S/W
PAN Defines the pan direction
NORMAL/
TILT Defines the tilt direction
REVERSE
DIMMER Defines the direction of the dimmer fader
USE NO/YES Activates the changes
P/START Sets the pan start point (restricted range)
Sets the pan end point (restricted range)
P/FINISH
Sets the tilt start point (restricted range)
T/START 000~255
T/FINISH Sets the tilt end point (restricted range)
USE Activates the changes
BLACKD NO/YES Activates the move-in black delay (3 s)
DMX The DMX controller can reset the product
RESET
SYSTEM The control panel can reset the product
LEDs illuminate at normal or high intensity
NORMAL/
POWER NOTE: The product will return to Normal if the internal
HIGH
temperature becomes too high
UC White output matches that of older products
COLOR RGBTOW White output set by RGB-W
White output defined by RGBW faders
OFF
The DMX controller can set the fan speed
DMX
FAN
The control panel can reset the fan speed
SYSTEM
In case of lost DMX signal, the product will remain in its current
SAVE
state
DMXERROR
In case of lost DMX signal, the product will blackout
BLAK
STEP Selects the program step
Selects the pan position
PAN
000~255
TILT Selects the tilt position
SPEED Selects the pan/tilt speed
Programming Levels
RED
GREEN Combines red, green, blue, and white to obtain a custom color
BLUE
DIMMER 000~255 Selects the dimmer value
STROBE Selects the strobe frequency and mode
Selects the dimmer speed
DIMSPEED
TIME Selects the step duration
USE NO/YES Activates the changes
PASSWORD **** Opens the Extra menu (see below)
Page 6 of 10
Description
Description