Changing Basic Settings; Home Connect - Siemens SX85Z801BE Information For Use

Basic setting
Remote Start
Factory setting
1
Factory setting (may vary according to model)
16.2 Changing basic settings
Open the appliance door.
1.
Press ⁠ .
2.
To open the basic settings, press
3.
for 3 seconds.
a The display shows H:xx.
a The display shows
Press
4.
the display shows the required set-
ting.
Press or
5.
display shows the right value.
You can change several settings.
To save the settings, press
6.
for 3 seconds.
Display text Selection
rc:01
rE:
⁠ .
repeatedly until
repeatedly until the
rc:00 - rc:02
Start with
Y:ES
Confirm with
Close the appliance door.
7.
Home Connect
17 Home Connect
This appliance is network-capable.
Home Connect
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
Home Connect en
Description
Activate or deactivate
→ "Remote Start ",
Page 42.
The following settings are
possible:
¡ With the setting "rc:00",
the function is perman-
ently deactivated.
¡ With the setting "rc:01",
the function can be selec-
ted via the
→ "Activating Remote
Start ", Page 42
¡ With the setting "rc:02",
the function is perman-
ently activated.
This basic setting is not
available until after you have
connected the device with
the Home Connect app.
→ "Home Connect ",
Page 41
Restore changed settings to
the factory settings.
The settings for initial start-
up must be configured.
button.
41