Table of Contents
Advertisement
Fault
Remnants of food on
tableware.
Cause and troubleshooting
Tableware is placed too close together or basket is
overfilled.
Arrange tableware with sufficient space in between.
1.
The spray jets must reach the surfaces of the table-
ware.
Avoid points of contact.
2.
Spray arm rotation of the lower spray arm is blocked.
Arrange tableware so that it does not obstruct
▶
spray arm rotation.
Spray arm nozzles are blocked.
Clean the Spray arms → Page 46.
▶
Filters are soiled.
Clean the filters.
▶
→ "Cleaning filters", Page 45
Filters are inserted incorrectly and/or not engaged.
Insert the filters properly.
1.
→ "Filter system", Page 45
Engage the filters.
2.
Washing programme selected too weak.
Select a more intensive washing programme.
▶
→ "Programmes", Page 19
Adjust the sensitivity of the sensors.
▶
→ "Sensors", Page 12
Tableware has been precleaned too intensely. The
sensors chose a weaker programme. Stubborn soiling
cannot be entirely removed.
Only remove large remnants of food and do not
▶
prerinse tableware.
Troubleshooting en
51
Advertisement
Table of Contents
