Toro SprayMaster 34246 Operator's Manual page 6

1. Read the instructions before servicing or performing
maintenance.
2. Time interval.
3. Check engine oil level; only use Toro blue-colored 10W-50
engine oil. Refer to the Operator's manual for further
instructions.
4. Check hydraulic oil level; only use Toro green-colored 15W-50
oil hydraulic fluid. Refer to the Operator's manual for further
instructions.
142-8079
1. Pins 1-2: Speedometer, 1A
2. Pins 3,4,9,10: Ground S/D
3. Pins 5-6: Accessory port
4. Pins 7-8: Main fuse, 15A
5. Pins 11-12: Accessory pump, 20A
6. Pins 13-14: Pump, 20A
7. Pins 15,16,21,22: Spreader relay
8. Pins 17-18: Accessory pump, 20A
9. Pins 19-20: Pump, 20A
142-8050
5. Check tire pressure and caster wheel pressure (4 locations).
6. Grease idler pivot; refer to the Operator's manual for further
instructions.
7. Grease caster pivots; refer to the Operator's manual for
further instructions (2 locations).
decal142-8079
1. Pins 1,2,3,7,19,20,21:
Pump solid state relay
6
142-8081
2. Pins 4,5,6,10,22,23,24:
Accessory pump solid
state relay
decal142-8050
decal142-8081