Table of Contents
Advertisement
Rotate the handles counterclockwise to turn on the
valves (open position) and clockwise to turn it off
(close position).
Important:
Do Not have both return valves in the
Off position when the pump is running.
1. Left return
2. Right return
Spread Gate Open/Close
Located on the right side of the hopper console and is
the top knob (see
Figure
Pull the handle up to open the spreader gate. Push
the handle down to close the spreader gate.
Hopper Console
1. Spread pattern control
knob
2. Digital display gauge
3. Spread Gate Open/Close
Figure 7
3. Left suction
4. Right suction
8).
Figure 8
4. Rate Dial
5. Spread side deflector
control
Spread Pattern Control Knob
Located on the left side of the hopper console and is
the fluted knob.
This control is used if the spread pattern is skewed or
dispensing too light/heavy to one side.
Rotate the knob counterclockwise if the pattern is
heavy to the right.
Rotate the knob clockwise if heavy to the left.
Spread Side Deflector Control
Located on the right side of the hopper console and
is the bottom knob.
Use the side deflector control to temporarily stop or
deflect granules away from sidewalks, parking lots,
patios, or anywhere granules are not desired to be
discharged from the left side of the spreader.
Push the knob down to lower the side deflector and
g387108
temporarily deflect the granules.
Pull the knob up to raise the side deflector.
1. Fence
2. Flowers
g393058
Rate Dial
Located on the hopper console to the right of the
digital display gauge (reference
The rate dial is used to set the amount of material to
be dispensed from the hopper gate.
With the Spread Open/Close handle in the closed
position, turn the dial to the appropriate setting. When
15
Figure 9
3. Side deflector lowered
Figure
8).
g312556
Advertisement
Table of Contents
