Replacing The Internal Speaker - Lenovo ThinkStation C20x 4269 Hardware Manual

Replacing the internal speaker

This section provides instructions on how to replace the internal speaker.
1. Open the computer cover. See "Opening the cover" on page 94.
2. Remove the front bezel. See "Removing the front bezel" on page 95.
3. Locate the internal-speaker connector on the system board. See "Internal
4. Note the location of the internal-speaker cable connection. Note the routing of
5. Use a blunt instrument (such as, the top of a ball point pen) to disengage one
6. Remove the speaker and speaker cable from the computer.
7. Route the speaker cable and then position the new internal-speaker tabs 3
8. Connect the speaker cable to the system board. See "System board connectors
9. Go to "Completing the FRU replacement" on page 123.
120
Hardware Maintenance Manual
components" on page 92.
the internal-speaker cable. Disconnect the internal-speaker cable from the
system board. See "System board connectors and components" on page 93.
of the internal-speaker-locking tabs 2 and slide that side of the speaker 1
upward enough to keep the locking tab disengaged. Then disengage the other
internal-speaker-locking tab and slide the internal speaker upward until the
speaker is released.
into the metal speaker slots and then push the internal speaker downward until
the speaker-locking tabs snap into position.
and components" on page 93.