User Password; Administrator Password; Setting, Changing, And Deleting A Password; Selecting A Startup Device - Lenovo ThinkStation C20x 4269 Hardware Manual

Lenovo thinkstation c20x 4269: hardware guide
Table of Contents

Advertisement

v Contain at least one alphabetic character, one numeric character, and one symbol
v Contain at least one of the following symbols: , . / ` ; ' []
v You can also use the space bar
v Setup Utility program and hard disk drive passwords are not case sensitive
v Not be your name or your user name
v Not be a common word or a common name
v Be significantly different from your previous password

User Password

When a User Password is set, the computer cannot be used until a valid password
is typed from the keyboard.

Administrator Password

When an Administrator Password is set, it deters unauthorized persons from
changing configuration settings. If you are responsible for maintaining the settings
of several computers, you might want to set an Administrator Password.
After you set an Administrator Password, a password prompt is displayed each
time you try to access the Setup Utility program.
If both the user and administrator passwords are set, you can type either
password. However, to change any configuration settings, you must use your
administrator password.

Setting, changing, and deleting a password

To set, change, or delete a password, do the following:
Note: A password can be any combination of up to twelve characters (A- Z, a-z,
1. Start the Setup Utility program (see "Starting the Setup Utility program" on
2. From the Setup Utility program menu, select Security.
3. Select Set Passwords. Read the information displayed on the right side of the

Selecting a startup device

If your computer does not start up (boot) from a device such as the CD-ROM,
diskette, or hard disk as expected, use one of the following procedures to select a
startup device.

Selecting a temporary startup device

Use this procedure to startup from any boot device.
Note: Not all CDs, hard disks, and diskettes are bootable.
1. Turn off your computer.
2. Press and hold the F12 key then turn on the computer. When the Startup
50
Hardware Maintenance Manual
and 0-9). For more information, see "Password considerations" on page 49.
page 49).
screen.
Device Menu appears, release the F12 key.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents