Lenovo ThinkCentre M58p 3063 Hardware Installation And Replacement Manual page 59

3. Move the jumper from the standard position (pin 1 and pin 2) to the
maintenance or configure position (pins 2 and pin 3).
4. Replace the computer cover and connect the power cord. See Chapter 4,
"Completing the parts replacement," on page 47.
5. Restart the computer, leave it on for approximately 10 seconds. Turn off the
computer by holding the power switch for approximately 5 seconds. The
computer will turn off.
6. Repeat step 1 and step 2 on page 50.
7. Move the Clear CMOS/Recovery jumper back to the standard position (pin 1
and pin 2).
8. Replace the computer cover and connect the power cord. See Chapter 4,
"Completing the parts replacement," on page 47.
Chapter 5. Security features
51