Inserting/Removing The Battery - Leica X1 Instructions Manual

Charging the battery
1. Connect the charger to a power outlet.
2. Insert the battery into the charger by
a. positioning it with its contacts face down and pointing at the counter-
parts (1.36a) in the battery bay, and
b. pushing it down until it lies flat in the bay.
Charge status indications
Correct loading is indicated by the status LED (1.37) glowing red, when it
turns green the battery is completely charged.
Inserting the battery in the camera/
Removing the battery from the camera
1. Set the main switch (1.7) to
2. Open the battery/memory card compartment door (1.30) by turning the
locking lever (1.30a) clockwise. The spring-loaded door then opens au-
tomatically.
OFF .
3. Insert the battery into the compartment with its contacts towards the
back of the camera. Push it into the compartment (1.34) until the light
gray spring locking catch (1.33) moves over the battery to hold it in
place.
4. Close the battery/memory card compartment cover and turn the lock-
ing lever anti-/clockwise.
85