Slave Id - Siemens SIMOVERT OP1S Operating Instructions Manual

3.4 Slave ID

With the "Slave ID" function, the user can request information about the connected slave.
The slave ID consists, for example, of the following lines:
MASTERDRIVES MC
PLUS
6SE7014-0TP50
1.5 kW
V1.0
15.09.1997
Starting from the basic menu, the "Slave ID" function is selected with "Raise" or "Lower"
and activated with "P". As all the lines cannot be shown at the same time, it is possible to
scroll the display as required with the "Lower" and "Raise" keys. In addition, the slave
number is shown at the top on the right-hand side.
P
Î
Ì
MotionControl MotionControl 00
Change slave Slave ID
Config. slave MASTERDRIVES MC
#Slave ID PLUS
Example of a slave ID
10
∇ ∇
Ì Î Ì
MotionControl 00
Slave ID
PLUS
6SE7014-0TP50
Operating Instructions
OP1S Operator Control Panel
∇
Î Ì Î
MotionControl 00 MotionControl 00
Slave ID Slave ID
6SE7014-0TP50
1.5 kW
477 459 4070 76 J AA-74
SIMOVERT MASTERDRIVES
and
so
on
Siemens AG