Table of Contents
Advertisement
Port Identification
Item
Description
Connects the stereo to a typical AM/FM antenna using an RF coaxial connector.
If you are installing the stereo on a boat with a metal hull, you must use a ground-dependent
ANT
antenna, and if you are installing the stereo on a boat with a non-metal hull, you must use a
ground-independent antenna. See the installation instructions provided with your antenna for
more information.
SXM TUNER Connects to a SiriusXM
NMEA
Connects the stereo to a NMEA 2000 network
USB
Connects the stereo to a USB source.
Contains the fuse for the device.
FUSE
See the device specifications for replacement fuse information.
Connects the stereo to the power and speaker wiring harness.
Connects the stereo to the auxiliary in and line/subwoofer out wiring harness.
Reserved for future use.
tuner to receive SiriusXM channels where available (not included).
®
(NMEA 2000 System Wiring Diagram,
page 11).
5
Advertisement
Table of Contents
