Table of Contents
Advertisement
Item Description
Zone 2 speakers
Water-tight connection
Powered amplifier
Zone 2 line out
Amplifier-on signal wire
Zone 1 speakers
Zone 1 line out
Zone 1 subwoofer out
Each cable provides a single mono output to a powered subwoofer or subwoofer amplifier, and one or
both cables can be used, depending on the connection requirements of the subwoofer or amplifier.
Powered subwoofer
Connecting a SiriusXM Tuner Module
This device is compatible with a SiriusXM SXV300 or newer vehicle tuner module.
1 If you have already connected an FM/AM antenna, a NMEA 2000 cable, or both, disconnect them from the
stereo.
2 Connect the cable from the SiriusXM tuner module to the SXM TUNER port on the back of the stereo.
3 Follow the instructions provided with the SiriusXM tuner module and antenna to complete the SiriusXM
installation.
4 If necessary, reconnect the FM/AM antenna, the NMEA 2000 cable, or both.
5 Complete the stereo installation.
10
Advertisement
Table of Contents
