Changing The Selections After Programme Has Started; Cancelling The Programme; End Of Programme - Beko WRYS51022C User Manual

Loading door light will start flashing when the machine is switched to Pause mode. Machine checks the
level of the water inside. If the level is suitable, Loading Door light illuminates steadily within 1-2 minutes
and the loading door can be opened.
If the level is unsuitable, Loading Door light turns off and the loading door cannot be opened. If you are
obliged to open the Loading Door while the Loading Door light is off, you have to cancel the current
programme; see "Canceling the programme".

5.15 Changing the selections after programme has started

Switching the machine to pause mode
Press the Start / Pause button to switch the machine to pause mode while a programme is running. The
light of the step which the machine is in starts flashing in the Programme Follow-up indicator to show that
the machine has been switched to the pause mode.
Also, when the loading door is ready to be opened, Loading Door light will also illuminate continuously in
addition to the programme step light.
Changing the auxiliary function, speed and temperature
Depending on the step the programme has reached, you can cancel or activate the auxiliary functions;
see, "Auxiliary function selection".
You may also change the speed and temperature settings; see, "Spin speed selection" and "Temperature
selection".
C
If no change is allowed, the relevant light will flash for 3 times.
Adding or taking out laundry
1. Press Start / Pause button to switch the machine to pause mode. The programme follow-up light of the
relevant step during which the machine was switched into the pause mode will flash.
2. Wait until the Loading Door can be opened.
3. Open the Loading Door and add or take out the laundry.
4. Close the Loading Door.
5. Make changes in auxiliary functions, temperature and speed settings if necessary.
6. Press Start / Pause button to start the machine.

5.16 Cancelling the programme

To cancel the programme, turn the Programme Selection knob to select another programme. Previous
programme will be cancelled. End / Cancel light will flash continuously to notify that the programme has
been canceled.
Pump function is activated for 1-2 minutes regardless of the programme step, and whether there is water
in the machine or not. After this period, your machine will be ready to start with the first step of the new
programme.
C
Depending on the step where the programme was canceled in, you may have to put detergent and softener again for
the programme you have selected anew.

5.17 End of programme

"End" appears on the display at the end of the programme.
1. Wait until the loading door light illuminates steadily.
2. Press On / Off button to switch off the machine.
3. Take out your laundry and close the loading door. Your machine is ready for the next washing cycle.
5.18 Your machine is equipped with a "Standby Mode"
In case of not starting any programme or waiting without making any other operation when the machine
is turned on by On/Off button and while it is in selection step or if no other operation is performed
approximately 2 minutes after the programme you selected has come to an end, your machine will
automatically switch to energy saving mode. Brightness of indicator lights will decrease. Also, if your
product is equipped with a display showing the programme duration, this display will completely turn off.
In case of rotating the Programme Selection knob or pressing any button, lights and display will restore to
their previous condition. Your selections made while exiting the energy saving mode may change. Check
the appropriateness of your selections before starting the programme. Readjust if necessary. This is not a
fault.
40 / EN
Washing Machine / User's Manual