Advertisement
Quick Links
Advertisement
Related Manuals for Kogan KAWLMFM90MA
Summary of Contents for Kogan KAWLMFM90MA
- Page 1 KOGAN TILT EXTENDABLE FULL MOTION HEAVY DUTY WALL MOUNT (SUITABLE FOR 37” – 90” TVS) KAWLMFM90MA...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, contact your local distributor for assistance. CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury. - Page 4 COMPONENTS A Wall mount assembly (x1) B TV brackets (x2) C Stencil (x1) D Locking bolt (x2) E Spanner (x1) F Spirit level (x1) M-A Screw M-B Screw M-C Screw M-D Screw M5 x 14 (x4) M6 x 14 (x4) M6 x 30 (x4) M8 x 30 (x4) M-E Screw...
- Page 5 INSTALLING MOUNT TO WALL Step 1 Using a pencil and spirit level, mark the desired position for the mount on your wall, using the stencil (C) for the hole positions. If mounting on dry wall or plaster-board, use a stud finder first to check positions of wall studs and ensure the position is free from electrical wiring.
- Page 6 Step 2 Drywall / plaster: Insert the top two screws (W-A), ensuring a 5mm excess is left between the head of the screw and the wall surface. Do not use wall anchors. Masonry / concrete: Insert wall anchors (W-B) into all six drilled holes. Insert the outer top two screws (W-A), ensuring a 5mm excess is left between the head of the screw and the wall surface.
- Page 7 Step 3 Lift the wall mount assembly (A) and hook onto the top two screws. Step 4 Drywall / plaster: Secure to the wall using washers (W-C) and screws (W-A) in the bottom two holes. Do not use the wall anchors. Masonry / concrete: Secure to the wall using washers (W-C) and ST6.3 screws (W-A) in remaining four holes.
- Page 8 INSTALLING BRACKET TO TV Align the brackets with your TV’s VESA holes and secure using supplied screws (“M-” set) and spacer (M-F) depending on required length. Check if additional spacers (M-G, M-H) are required to ensure correct length of screw, as per the below image.
- Page 9 SECURING TV TO MOUNT Hook the TV with brackets installed onto the wall mount. Two people should carry the TV to prevent damage. Once in place, secure the brackets into place using the locking bolts (D).
- Page 10 Set your cable management according to the images below, then tighten the mount using the spanner to lock mount into position.
- Page 11 NOTES...
- Page 12 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...