SAFETY & WARNINGS Read the entire user guide before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, contact your local distributor for assistance. Use with products heavier than the rated weights indicated may result in instability causing possible injury.
Page 5
ASSEMBLY Drywall / plaster: Use a Ø4.5mm or 3/16 55mm deep 4 holes Masonry / concrete: Use a Ø10mm or 3/8 drilling 60mm deep 6 holes 60mm 55mm (2.4 Ø4.5mm Ø10mm (Ø (Ø3/8...
Page 8
Step 4: Hook the TV with brackets installed onto the wall mount. 2 people should carry the TV to prevent damage. Note: The TV can be mounted in 2 different positions depending on your requirements. Pay attention to ensure it is properly positioned before proceeding. Once in place, fasten the safety screws to secure the brackets in place.
Page 9
Step 5: Use the supplied velcro straps (D) to manage the TV cables. Step 6: Adjusting the Vertical Tilt Loosen the 4 Allen screws slightly and adjust the vertical tilt of the TV. Notes: If the display does not stop at your desired position, tighten the screws as shown.
Page 10
Step 7: Adjusting the Horizontal Angle Loosen the 4 Allen screws slightly and adjust the horizontal angle of the TV. Notes: If the display does not stop at your desired position, tighten the screws as shown.