RCT Power Storage DC 8.0 Manual page 43

6 Set "Obtain an IP address automatically" to "ON" and
press the "FINISH" button.
7 Wait until the new settings are confirmed and then press
the "FINISH" button again.
8 Close the RCT Power APP. (this will speed up the process
of obtaining the IP address).
After a short time, the LCD display of the inverter will
show the IP address assigned by your home network.
The inverter is now registered in your home network.
9 Connect your Android device to your home network.
Launch the "RCT Power APP" again.
In the "NETWORK" menu press the "SCAN" button.
Alternatively, you can enter the assigned IP address
under "Add device" at the bottom of the screen and
"+"
press the symbol.
Once the device appears on the device list press the
corresponding radio button to select it.
38