Installing The Cable Management D-Ring Bracket In A Side Mount; Installing The Cross-Over Bracket - HP G2 Series Installation Manual

Installing the cable management D-ring bracket in a side mount

Procedure
1. Align the cable management D-ring bracket with the screw hole in the desired location on the side of your rack (1).
2. Using a T-25 Torx driver, insert one M5.5 x10-mm Torx screw to secure the cable management D-ring bracket to the rack
(2).

Installing the cross-over bracket

Procedure
1. Align the cross-over bracket with the appropriate screw holes in the desired location across the back of the rack (1).
Cable Management Combo kit
24