NEC N8403-034 User Manual page 45

13> Select "1". Then, a window is displayed where you see the BIOS is currently enabled or disabled
and switch the status like:
Adapter 01:
The BIOS is Disabled!!
Enable Press 1, Disabled Press 2:_
Enter <x> to Exit
14> Select "1", and confirm that a message, "The Boot BIOS is Enabled!!" is displayed.
Adapter 01:
The BIOS is Enabled!!
Enable Press 1, Disable Press 2:_
Enter <x> to Exit
15> Now, you have made settings to start installing an operating system on your Fibre Channel device.
Enter "x" (Exit) to reboot CPU Blade and start installation.
 Refer to the user's manual of the CPU Blade and "N8403-034 Setup Card" for
Fibre Channel Driver, how to install an operating system on Fibre Channel device.
Important
Contact your sales agent if necessary.
PCI Bus, Device, Function (30,00,00)
<Esc> to Previous Menu
PCI Bus, Device, Function (30,00,00)
<Esc> to Previous Menu
- 45 -