Drawer Box Assembly - HAMPTON BAY B12 Use And Care Manual

Drawer Box Assembly

1
Attaching the drawer sides
□ Place the drawer front (F) face down on a smooth surface that will not scratch or damage the face of the drawer, such as a towel
or piece of cardboard (1) from the packaging.
□ Use a rubber mallet to tap the drawer sides (G) into place on the drawer front (F).
□ Insert a screw (BB) into the countersunk holes on each side, and partially tighten.
NOTE: It is important that you only partially tighten the screws
in order to avoid cracking.
G
2
Attaching the drawer bottom
□ Slide the drawer bottom (H) into the groves on the sides of
the drawer assembly.
F
1
G
G
BB
G
11
Please contact 1-855-HD-HAMPTON for further assistance.
G
1
H
BB
HAMPTONBAY.COM