HAMPTON BAY B12 Use And Care Manual page 16

Completing the Assembly (continued)
3
(OPTIONAL) Adjusting the door
□ Door hinges are 6-way adjustable.
□ Up or down adjustment – Loosen screw 1, align the door,
and tighten screw 1.
NOTE: It is critical that you do NOT overtighten screw 1.
□ Left or right adjustment – Turn screw 2 clockwise or
counterclockwise.
□ In or out adjustment – Turn screw 3 clockwise or
counterclockwise.
4
Installing the shelves
□ Place the shelf pins (DD) inside the assembly at the desired
locations using the pre-drilled holes.
□ Tilt the shelves (E) to fit inside the face frame and snap
over the shelf pins (DD).
□ To remove the shelves, push the tabs (1) on the shelf pins
and lift the shelf.
NOTE: Do not install shelves until the cabinet assembly has
been fully installed.
2
1
16
1
3
2 3
DD
1
E
DD