Page 1
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!
Table of Contents Table of Contents ............2 Pre-Assembly ..............3 Planning Assembly ..............3 Important Safety Instructions ........2 Hardware Included ..............3 Save These Instructions ............2 Swivel Chair Package Contents..........Read All Instructions Before Use ..........2 Table Package Contents ............5 Warranty ................
Warranty 2 YEAR FRAME AND 2 YEAR FABRIC LIMITED WARRANTY WHAT IS COVERED We warrant the frames to be free of manufacturing defects to the original purchaser for two years, and a two year limited warranty for the fabric. WHAT IS NOT COVERED It remains the customer’s responsibility for freight and packaging charges to and from our service center.
Pre-Assembly (continued) SWIVEL CHAIR PACKAGE CONTENTS Quantity Part Description Wrench Chair frame Support tube Chair base Seat cushion Lumbar pillow...
Page 5
Pre-Assembly (continued) TABLE PACKAGE CONTENTS Part Description Quantity Wrench Table top Table leg Leg connector HOMEDEPOT.CA Please contact 1-855-HD-HAMPTON for further assistance.
Swivel Chair Assembly ATTACHING THE SUPPORT BAR TO THE CHAIR FRAME Place the chair frame (A) upside down on a soft surface. Attach the support tube (B) to the chair frame (A) using M8x20 combination hex bolts (CC). Once all of the bolts are in place, fully tighten the bolts using the wrench (EE).
Page 7
Swivel Chair Assembly (continued) CONNECTING THE SUPPORT TUBE TO THE CHAIR BASE Turn the chair right side up. Insert the support tube (B) into the chair base (C). HOMEDEPOT.CA Please contact 1-855-HD-HAMPTON for further assistance.
Page 8
Swivel Chair Assembly (continued) CHECKING THE CHAIR lumbar pillow (E) Ensure all connections are secure before use.
Page 9
Table Assembly CONNECTING THE TABLE LEGS TO THE TABLE TOP Place the table top (F) upside down on a soft surface. Attach the table leg (G) to the table top (F) using M6x15 combination bolts (AA). Do not fully tighten the bolts at this step. Loosely tighten all the bolts using the NOTE: hex wrench (DD).
Page 10
Table Assembly (continued) ATTACHING THE LEG CONNECTOR TO THE TABLE LEGS Attach the leg connector (H) to the table legs (G) using M6x25 combination bolts (BB). Do not fully tighten the bolts at this step. Loosely tighten all the bolts using the NOTE: hex wrench (DD).
Table Assembly (continued) TIGHTENING THE BOLTS Once all of all bolts are in place, fully tighten the bolts. Turn the table right side up. Ensure all connections are secure before use. Care and Cleaning For best results, clean the frame and fabric with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate.
Page 12
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HOMEDEPOT.CA Retain this manual for future use. Factory chair ID # FZS80386S...
Need help?
Do you have a question about the FZS80386-ST and is the answer not in the manual?
Questions and answers