Table of Contents
Advertisement
1
Technical data
1.1 Density transducer type DIMF 2.0
Density range
Calibration range
Accuracy
Repeatability
Temperature range of liquid
Temperature influence without
compensation
Temperature compensation
Pressure influence
Operating pressure
Liquid
Material: wetted parts
Material: transmitter housing
Smallest inside diameter
Specialties
Weight
Process connections
All percentages are referenced to a density of 1000 kg/m³.
For the exact specification of the device version, see the Configuration Data Sheet of the device
supplied.
We reserve all rights of ownership and exploitation in respect of these
documents, including industrial property rights. These documents may only
be used with our express consent in writing, and only to the extent permitted
in any such consent. The documents may not be duplicated or made
available to third parties. In case of violation of the aforementioned
provisions, we reserve all rights.
0 to 5000 kg/m³
400 to 2000 kg/m³
see Configuration Data Sheet supplied
better than ±0.02 % (±0.2 kg/m³)
(under reference condition)
see Configuration Data Sheet supplied
better than ± 0.005 % (± 0.05 kg/m³)
- 40°C to + 150°C
see Configuration Data Sheet supplied
approx. 2,8 kg/m³/°C
via integral Pt1000
in acc. with DIN Class A
directly in the transmitter
less than 0.02 kg/m³/bar
100 bar
see Configuration Data Sheet supplied
pumpable liquids
see Configuration Data Sheet supplied
1.4571
see Configuration Data Sheet supplied
made of 1.4571
∅ 10 mm
Gasket-free construction
on request. Material certificates
in acc. with DIN ISO10204-3.1B;
see Configuration Data Sheet supplied
approx. 4.2 kg
Swagelok fittings for
outer pipe diameter 12 mm
see Configuration Data Sheet supplied
(Standard)
(Standard)
(Standard)
(Standard)
(Standard)
(Standard)
5
Advertisement
Table of Contents
