Foreword - Bopp & Reuther DIMF 2.0 TVS Operating Instructions Manual

Density transducer
Table of Contents

Advertisement

Foreword

I.
Transport, delievery, storage
Storage and transport:
Protect the devices against humidity, soiling, impact, and damage.
Inspection of the delivery:
Upon receipt, check the delivery for completeness. Compare the data of the device with the data on the
delivery note and in the order records.
Report any transport damage immediately after delivery. Damage reported later cannot be recognized.
II. Warranty
For the scope and period of warranty, please refer to the contractual terms of delievery. Claims under
warranty shall be conditional to expert installation and startup in compliance with the operating
instructions for the device.
The electronics contains electrostatically sensitive parts. Therefore, electrostatic discharges must be
avoided when the electronics housing is open.
III. General safety information
Read and observe these Operating Instructions thoroughly and keep them
available for reference.
Installation must be carried out by qualified personnel.
For the installation and operation of the device, the regulations of ElexV, the
!
generally recognized rules of engineering practice and the Operating
Instructions must be observed.
We do not assume liability for the improper handling, use, installation,
operation, or maintenance of the device.
In the case of corrosive media, resistance of the oscillating tube must be
checked.
Damaged devices must be shut down.
We reserve all rights of ownership and exploitation in respect of these
documents, including industrial property rights. These documents may only
be used with our express consent in writing, and only to the extent permitted
in any such consent. The documents may not be duplicated or made
available to third parties. In case of violation of the aforementioned
provisions, we reserve all rights.
4

Advertisement

Table of Contents
loading

Table of Contents