Table of Contents
Advertisement
14 Self-monitoring functions
14.1 Monitoring supply voltage
After a power failure a power-ON reset will be carried out, and the error code 1 will be displayed in
channel "[" or the error will be reported via HART
14.2 Error message
An error code will be displayed on channel "]". The error that was reported last will be displayed.
For the corresponding error description, see section 13.2.1 Error code table.
15 Service
We reserve all rights of ownership and exploitation in respect of these
documents, including industrial property rights. These documents may only
be used with our express consent in writing, and only to the extent permitted
in any such consent. The documents may not be duplicated or made
available to third parties. In case of violation of the aforementioned
provisions, we reserve all rights.
.
Bopp & Reuther
Messtechik GmbH
Service Abt. MRV-S
Am Neuen Rheinhafen 4
67346 Speyer
Phone:
+49 (0) 6232 657-0
Fax:
+49 (0) 6232 657-505
26
Advertisement
Table of Contents
