Table of Contents
Advertisement
5.2 Piping
- Inner diameter of connecting pipe: min. ø12
- Sampling connection to be fitted laterally when product line is in horizontal position.
- By-pass pipes should be as short as possible.
- If necessary, provide both heat insulation and flushing connections (the latter close to the
density transducer).
5.3 Process connections
Ensure that the density transducer connection is compatible with the by-pass connections.
For the connection type of your density transducer, see the Configuration Data Sheet supplied.
5.4 Relationship between permissible ambient temperature and temperature of liquid
DIMF ... (interconnected version)
Class
Ambient
temperature
T2
46
T3
46
T3
49
T3
50
T4
52
T4
54
T4
58
We reserve all rights of ownership and exploitation in respect of these
documents, including industrial property rights. These documents may only
be used with our express consent in writing, and only to the extent permitted
in any such consent. The documents may not be duplicated or made
available to third parties. In case of violation of the aforementioned
provisions, we reserve all rights.
Temperature of
Type
liquid
210
200
H
170
150
S+H
135
110
60
High temperature
Standard temperature
and high temperature
11
Advertisement
Table of Contents
