Setting The Date; Selecting °F Or °C - La Crosse Technology WS-7059U4 Instruction Manual

VII. SETTING THE DATE
Note: This is only necessary if you do not wish to wait for
the WWVB reception. All manual set data will be over-
ridden by the reception of the WWVB signal.
1. Press and hold the MODE/SET button for 5
seconds, or until "Lcd 5" flashes in the
TIME LCD.
2. Press the MODE/SET button 7 more times to
reach the Numeric Date setting mode.
3. "1.1" is the default setting, representing
month and date respectively. The digit
representing the month should be flashing.
4. Press the CH/+ button to advance the
month.
5. Press the MODE/SET button to confirm the
month setting and to shift to the numeric day
setting. The digit representing the day
should be flashing.
6. Press the CH/+ button to advance the day.
7. Press the MODE/SET button to confirm the
date and to advance to °F and °C selection.
VIII. SELECTING °F OR °C
1. Press and hold the MODE/SET button for 5
seconds, or until "Lcd 5" flashes in the
TIME LCD.
2. Press the MODE/SET button 8 times to
reach the °F or °C setting mode.
3. "°F" is the default setting, and should be
flashing in the TIME LCD.
9