Table of Contents
Advertisement
8
Adjustments
Figure 20: Mounting the swivel stop
Nm
340°
1
3
4
Nm
1568913, Edition 2019-06, Version 0
8.8.4 Mounting the swivel stop
(See Figure 20)
1.
Follow the general safety instructions prescribed in Chapter 8.1 on
page 27.
1
2.
The assignment and size of the setscrew①and the ball stop③for
the different versions of the pendant system and the Drop tube are
described in Chapter 8.8.1, "Versions", on page 34.
3.
Unscrew a setscrew① from the threaded hole ② .
2
4.
Rotate the extension arm, extension arm XL, spring arm or Drop
tube towards the desired end stop position and then insert 1 ball
stop③ into the threaded hole② .
1
NOTE – Make sure that the ball stop is securely in place
2
The extension arm, spring arm or the Drop tube can be rotated once the
ball stop③ has been completely inserted into one of the mounting
fixtures④ . Otherwise, these are blocked and the ball stop③must be
pushed into one of the mounting fixtures④whilst gently rotating the ex-
tension arm, spring arm or Drop tube using s screwdriver.
5.
Rotate the extension arm, spring arm or Drop tube towards the de-
sired second end stop position and then insert 1 additional ball
stop③into the threaded hole② .
6.
Slightly rotate the extension arm, spring arm or Drop tube and then
3
screw the setscrew①into the threaded hole②as far as it will go.
•
The setscrew①now serves as an end stop for the ball
1
stop③mounted and restricts the swivel range of the extension arm,
3
spring arm or Drop tube.
4
3
Risk of internal supply cables twisting off
The swivel stop can fail if the fixing elements have not
been properly tightened, and the supply cables can twist
off.
• Tighten the setscrew M16① or setscrew M20① to
40Nm.
1
7.
Tighten the setscrew①to 40 Nm.
8.
To check that the swivel stop functions securely:
2
•
The swivel range of the extension arm or spring arm must be
restricted to less than 360 degrees.
9.
To change a ball stop③ mounted, refer to Chapter 8.8.5, "Changing
or dismantling the swivel stop", on page 37.
36
WARNING
en
Advertisement
Table of Contents
