Table of Contents
Advertisement
4
Device and Functional Description
Extension arm (dual-arm type only)
Spring arm (single- and
(dual-arm type only)
End stops on the extension arm,
spring arm and Drop tube
Brake on the extension arm and spring arm
4.1
Device description
Canopy
Since the points for connecting the electrical cables of the pendant system are located un-
der the canopy
ised by the operator.
The extension arm
zontally.
The spring arm
dual-arm type)
adjusted +20 degrees upwards and –40 degrees downwards.
Drop tube
The length of the Drop tube
that the CEMOR
CEMOR
The CEMOR
mation on the CEMOR
livery of the CEMOR
Navigator M6
The Navigator M6
formation on the Navigator M6
of delivery of the Navigator M6
4.2
Functional description
Extension arm
The extension arm
the CEMOR
Spring arm
The spring arm
the Navigator M6
In order to prevent collisions with other components or walls, the swivel range
of the extension arm
bearing
4
sion arm
2
the factory. They can be re-adjusted as described in Chapter 8.8 on page 34.
Pendant system Navigator Lift
The extension arm
brake
,
justed position.
Pendant system Navigator Lift
The extension arm
which keeps the extension arm
The mechanical brake can be adjusted as described in Chapter 8.2.2 on page 28.
Pendant system Navigator Lift
The extension arm XL
,
which keeps the extension arm XL
sition.
Pendant system Navigator Lift
The extension arm
air operated) brake
ble in any adjusted position.
The additional mechanical brakes (friction brakes) ensure that the extension arm
spring arm
tween the extension arm and the spring arm (Dual arm type only) in the case of a failure
of the pneumatic (compressed air operated) brake
justed as described in Chapter 8.2.1 on page 28.
, the canopy
may only be removed by specialist personnel author-
1
1
or the XL extension arm
2
can be rotated up to 340 degrees horizontally and can be vertically
3
compensates different ceiling heights in order to ensure
4
or the Navigator M6
5
can be rotated up to 340 degrees horizontally. For more detailed infor-
5
refer to the Operating Instructions included in the scope of de-
5
.
5
can be rotated up to 340 degrees horizontally. For more detailed in-
6
refer to the Operating Instructions included in the scope
6
.
6
or the XL extension arm
2
or the Navigator M6
5
6
serves for the horizontal and vertical positioning of the CEMOR
3
.
6
, extension arm XL
2
can be restricted by means of internal end stops. The end stops of the exten-
, spring arm
and the Drop tube with roller bearing
3
™
180:
and the spring arm
2
which keeps the extension arm
™
180 Friction:
and the spring arm
2
and the spring arm
2
™
XL 180:
and spring arm
2
™
180 Air
and the spring arm
2
,
which keeps the extension arm
remain stable at the bearing point towards the ceiling tube and also be-
3
23
can be rotated up to 340 degrees hori-
2
is positioned at the working height desired.
6
serves for the horizontal positioning of
2
.
, spring arm
and Drop tube with roller
2
3
4
are equipped with an electropneumatic
3
and the spring arm
2
are equipped with a mechanical brake
3
stable in any adjusted position.
3
is equipped with an electropneumatic brake
3
and spring arm
stable in any adjusted po-
2
3
Plus
:
are equipped with a pneumatic (compressed
3
and the spring arm
2
,
. The braking force can be ad-
1568913, Edition 2019-06, Version 0
en
or
5
are pre-adjusted at
stable in any ad-
3
sta-
3
and
2
Advertisement
Table of Contents
