2
Safety Instructions
Figure 5: Information on the rating plate
TYPE:
Navigator Lift,180,
Sing e
l
Extension Arm 1000 mm
AC 100-240V/50-60Hz 220VA
load 30-60 kg
Manufactured for
Medical Illumination International, 547 Library Street, San Fernando, CA 91340 USA
TYPE:
Navigator Lift, 0,AirPlus,Single
18
Extension Arm 1000 mm
AC 100- 0V/50-60Hz
24
220V
A
load
120-18
0 kg
Manufactured for
Medical Illumination International, 547 Library Street, San Fernando, CA 91340 USA
TYPE:
Navigator Lift,180,Dual
Extension Arm 00/1000 mm
6
AC 100-240V/50-60Hz 220VA
load 30-60 kg
Manufactured for
Medical Illumination International, 547 Library Street, San Fernando, CA 91340 USA
TYPE:
Navigator Lift, 0,AirPlus,
18
Dual
Extension Arm
600/
1000 mm
AC 100- 0V/50-60Hz
24
220V
A
load
50-8
0 kg
Manufactured for
Medical Illumination International, 547 Library Street, San Fernando, CA 91340 USA
TYPE:
Navigator Lift,
XL,
180,Dual
Extension Arm 1 00/1000 mm
6
AC 100-240V/50-60Hz 220VA
load 30-60 kg
Manufactured for
Medical Illumination International, 547 Library Street, San Fernando, CA 91340 USA
TYPE:
Navigator Lift, 0,
18 Friktion Dual
,
Extension Arm
600/
1000 mm
AC 100- 0V/50-60Hz
24
220V
A
load
50-8
0 kg
Manufactured for
Medical Illumination International, 547 Library Street, San Fernando, CA 91340 USA
2.4
(See Figure 5)
•
6000000
•
WWYYW000000000
•
2019
•
•
6000000
Serial number
WWYYW000000000
•
2019
Power supply
•
Load bearing capacity
6000000
•
WWYYW000000000
2019
Date of manufacture
•
–
6000000
–
WWYYW000000000
–
2019
–
•
•
6000000
WWYYW000000000
2019
6000000
WWYYW000000000
2019
17
Information on the rating plate
The rating plates are attached to the top side of the extension arm or
XL extension arm and under the front cover of the spring arm.
™
Navigator Lift
180 is the version equipped with electromagnetic
brakes.
™
Plus
Navigator Lift
180 Air
is the version equipped with pneumatic
(compressed air operated) brakes.
Navigator Lift
™
XL 180 is the version equipped with the XL extension
arm.
™
Navigator Lift
180 Friction is the version equipped with a mechani-
cal brake.
The rating plate indicates the serial number (SN) of the pendant sys-
tem.
The rating plate provides information on the power supply of the pen-
dant system.
The value of e.g. 120 – 180kg indicates the permissible weight range
and the maximum load bearing capacity of the spring arm.
The digits 1 to 4 of the serial number (SN) indicate the date of
manufacture of the pendant system.
The first two digits indicate the week of manufacture,
e.g. 14 = calendar week 14.
The following two digits indicate the year of manufacture,
e.g. 15 = 2015.
The letter in the 5th position indicates the factory, e.g. H = Hünfeld.
The digits following the letter indicate the serial number.
The information and illustrations serve as examples.
The information and illustrations on the rating plate can vary.
1568913, Edition 2019-06, Version 0
en