Table of Contents
Advertisement
Retevis
INSTALLING BELT CLIP
If the belt clip is not installed, its mounting
location may get hot during continuous
t r a n s m i s s i o n or u n d e r h e a t e d
environment.
Note:
If the belt clip is not installed, its mounting
location may get hot during continuous
t r a n s m i s sion or u n d e r h e a t e d
environment.
INSTALLING THE {OPTIONAL)
SPEAKER/MICROPHONE
Insert the speaker/microphone plugs
into the speaker/microphone jacks of
the transceiver.
Note:
The transceiver is not fully water resistant
when using speaker/microphone.
08
GETTING AC QUAINTED
D
E
F
A. Led lndicato----The LED indicator lights continuously red when
transmitting. And lights green when in reception condition.
B. Channel Switch---Rotate it to select the channel. No.16 channel
is scanning channel.
C. POWER SWITCHNOLUME CONTROL
Turn clockwise to switch ON the transceiver.
Tum counterclockwise fully to switch OFF the transceiver. Rotateto
adjust the volume.
D. PTT (PUSH-TO-TALK) BUTTON
Press this button, then speak into the microphone to call a station.
Release to receive a call.
E. MONITOR BUTTON
Press and hold (Squelch OFF) to hear the background noise;Releas
e to return to normal operation.
F. FUNCTION KEY----Just press to activate the torch function.
G. SPEAKER/MICROPHONE JACKS
Retevis
09
Hide quick links:
Advertisement
Table of Contents
