Table of Contents
Advertisement
Chassis Installation
If you are installing any other ATI switch, use standard chassis screws
(not provided).
4. Power up the switch.
5. Connect the appropriate data cables.
You are done with the installation of the external rackmount switch.
Re-installing Faceplates/Air-Dams in the Chassis
Faceplates/air-dams control air flow and help keep the chassis cool. Chassis
are shipped with the faceplates/air-dams in place. If your chassis configuration
eventually changes and one or more slots become vacant, re-attach a faceplate/
air-dam to each empty slot.
To re-install faceplates/air-dams:
1. Align the faceplate/air-dam as shown in Part A of Figure 14.
A
Figure 14: Attaching the Faceplate/Air-Dam to an Empty Slot
2. Slide the faceplate/air-dam along the chassis guides until the notch on the
end connects into the slot at the back of the chassis.
See detail in Part B of Figure 14.
3. Screw each side of the faceplate/air-dam in place.
You are done with the installation.
18
B
Advertisement
Table of Contents
