Advertisement
Specifications
Specification
Input Voltage
Force
Speed
1
Install Size Retracted
Install Size Extended
Foot Length
Duty Cycle
Collision Detection
2
Frame Material
Remote Functions
Protection Class
Unit Weight
Certifications
Limited Warranty
Feature
Soft Start and Stop
1
Collision Detection
2
Memory Presets
3
Low Power Mode
10% (2 Minutes On, 18 Minutes Off)
Program Up to 4 Memory Presets
The table lift will modulate movement when starting and stopping to ensure
smooth travel.
The table lift will stop movement and briefly move in the opposite direction if
an obstruction is detected. Refer to Collision Detection Sensitivity in
Operations section to configure.
The wired remote has the ability to save preset height locations for convenience.
Refer to Memory Presets in Operations section.
Note: Not available in all remote models.
Remote LED height display will turn off when left idle for 10 seconds.
Note: Not available in all remote models.
Description
120 VAC, 60 Hz
330 lbs (110 lbs per Leg)
1.57"/sec
23.6"
49.1"
23.6"
Yes
Stell
, USB Charging Port
3
IP51 Legs and IP20 Controller
97.30 lbs
UL (Customizable)
15 Years
Description
P a g e | 4
Advertisement
