STORZ & BICKEL Volcano HYBRID Quick Start Manual

QUICK START MANUAL
This QUICK START MANUAL will guide you through the
main steps on how to use your new VOLCANO HYBRID
with the Tube or the Valve Balloon. For detailed
directions always refer to the included Instructions for
Use or contact us at info@storz-bickel.com.
Please clean the Mouthpieces before use.
TUBE
2.
2.
3.
.
1. 2. 4
Fill Filling Chamber with Screw on Filling Chamber. Choose temperature.
3. 5.
ground substance and screw Switch heat on. Wait until set value is equal
on Filling Chamber Cap. to actual value (short acoustic
signal of the air pump).
6. 7.
Put Tube on Filling Chamber. Inhale.
BALLOON
2.
uj)j·j5YE qq
2.
3.
.
1. 2. 4
Fill Filling Chamber with Screw on Filling Chamber. Choose temperature.
3. 5.
ground substance and screw Switch heat on. Wait until set value is equal
on Filling Chamber Cap. to actual value (short acoustic
signal of the air pump).
ok
11.
9. Observe vapor density. 10. Turn off air pump. Remove full Balloon Unit.
6.
7.
6. 8.
Pull Valve Balloon tight. Switch Air Pump on.
7.
Put Valve Balloon on
Filling Chamber.
12. 13.
Attach Mouthpiece to Inhale.
Valve Balloon.