STORZ & BICKEL VOLCANO HYBRID Quick Start Manual

QUICK START MANUAL
This QUICK START MANUAL will guide you through the
main steps on how to use your new VOLCANO HYBRID
with the new Tube or the Valve Balloon. For detailed
directions always refer to the included Instructions for
Use or contact us at info@storz-bickel.com.
Please clean the Mouthpieces before use.
TUBE
Do not overfill!
2. 3.
tap tap
[ HEAT ] [ + ] / [ - ]
2.
1. Switch heat on 4.
Fill Filling Chamber with
ground substance and screw
3. 5.
on Filling Chamber Cap Choose temperature
4.
7.
5. 6.
tap tap
[ AIR ] [ AIR ]
6. 8.
Screw on Filling Chamber Turn off Air Pump
Preheat substance for 7. 9.
Put Tube on Filling
Chamber
approximately 5 sec.
BALLOON
Do not overfill!
1.
Fill Filling Chamber with
ground substance and screw
on Filling Chamber Cap
tap
[ AIR ]
Clean Mouthpiece 9. Turn off Air Pump
Inhale
4.
2. 3.
tap tap
[ HEAT ] [ + ] / [ - ]
5.
tap
[ AIR ]
2. 4. 6.
Switch heat on Screw on Filling Chamber
3.
5. 7.
Choose temperature Preheat substance for
approximately 5 sec.
10.
10. 12.
Unscrew Filling Chamber 11. Detach Valve Balloon
with full Valve Balloon
from Filling Chamber
13.
6.
7.
ok
8.
Pull Valve Balloon tight Observe vapor density
Put Valve Balloon on
Filling Chamber
14.
Clean Mouthpiece Inhale
Attach Mouthpiece
to Valve Balloon