Husqvarna MADSAW 525iDEPS Operator's Manual page 20

Maintenance
Check the saw chain with regard
to visible cracks in the rivets and
links, whether the saw chain is stiff
or whether the rivets and links are
abnormally worn.
Make sure that the start and stop
button works correctly and are not
damaged.
Make sure that the power trigger and
the power trigger lockout function
correctly from a safety point of view.
Make sure that all controls work and
are not damaged.
Keep the handles dry and clean.
Makes sure that that there is no oil
and grease on the handles.
Make sure that the saw chain cover
is not damaged. Replace the saw
chain cover if it is damaged.
Make sure that the screws and nuts
are tight.
Clean the oil tank cap
Make sure that the battery release
buttons on the battery works and
locks the battery in the product.
Examine that the battery charger is
not damaged and function correctly.
Make sure that the battery is not
damaged.
Make sure that the battery is charg-
ed.
Make sure that the battery charger is
not damaged.
Examine all cables, couplings and
connections. Make sure that there is
no damage or dirt.
Clean the saw chain cover.
File off any burrs from the edges of
the bar.
Lubricate the shafts.
Apply dielectric grease to the shaft
coupling.
20
Daily Weekly
X
X
X
X
X
X
X
X
X
X
X
X
X
Monthly
X
X
X
X
X
1824 - 003 - 28.06.2022