Download Print this page
Vimar ELVOX 46322.003 Installation And Operation Manual
Vimar ELVOX 46322.003 Installation And Operation Manual

Vimar ELVOX 46322.003 Installation And Operation Manual

Advertisement

Quick Links

CCTV
CCTV
1. Precautions
Do not install or use the camera in an
Do not install the camera in extreme
environment where the humidity is high.
temperature conditions.
Do not install or use the camera in an
Only use the camera under conditions
environment where the humidity is high.
where temperatures are between
-10°C and +50°C. Be especially careful
to provide ventilation when operating
under high temperatures.
Do not touch the front lens of the camera.
Never keep the camera pointed directly
at strong light.
This is one of the most important parts
It can cause malfunctions to occur.
of the camera. Be careful not to leave
fingerprints on the lens cover.
Do not expose the camera to rain or spill
Do not expose the camera to radioactivity.
liquids on it.
If it gets wet, wipe dry immediately.
If exposed to radioactivity the CCD will
Liquids can contain minerals that
fail.
corrode the electronic components.
Installation and operation manual
46322.003
HD-SDI fullHD MiniDome Camera, 4mm Lens
Do not install the camera under unstable
lighting conditions.
Severe lighting change or flicker can
cause the camera to work improperly.
Do not drop the camera or subject it to
physical shocks.
Housing damage can compromise
weatherproof ratings.
NOTE
* If the camera is exposed
to spotlight or object
reflecting strong light,
smear or blooming may
occur.
* please check that the
power satisfies the normal
specification before
connecting the camera.
EN
CCTV
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
CAUTION
RISK OF ELECTRIC SHOCK
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DO NOT OPEN
CAUTION
ISO14001
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
DO NOT OPEN
NO USER-SERVICEABLE PARTS INSIDE.
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DO NOT REMOVE COVER(OR BACK).
ISO14001
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert
the user to the presence of uninsulated dangerous voltage within the product's enclosure that
may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with limits for a Class
A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at their own expense.
WARNING - Changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
☞Do NOT use power sources other than those specified.
This installation should be made by a qualified service person and should conform to all
local codes.
Via Pontarola, 14/a
35011 Campodarsego PD - Italy
Tel. +39 049 920 2511
Fax +39 049 920 2603
www.elvox.com
CCTV
2. Safety Instructions
Precautions for use
• This camera should be installed by qualified personnel only
• There are no user serviceable parts inside
• Do not disassemble this camera other than to make initial adjustments
• Use a UL approved regulated 24 volt AC or 12 volt DC power supply
• Use appropriate low voltage power cable to prevent fire or electrical shock
• Please insure that your installation area can support the weight of the camera
Please handle this camera carefully
• Do not use a strong or abrasive detergent when cleaning the camera
• Do not expose the camera to direct sun
• Do not install camera in places where humidity is high
• Do not install near cooling or heating device
• Do not expose camera to rain or moisture
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
S6I.46322.003.EN RL. 00 13 03
ELVOX - Campodarsego - Italy
EN

Advertisement

loading
Need help?

Need help?

Do you have a question about the ELVOX 46322.003 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Vimar ELVOX 46322.003

  • Page 1 CCTV Installation and operation manual CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK). CAUTION NO USER-SERVICEABLE PARTS INSIDE. RISK OF ELECTRIC SHOCK REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DO NOT OPEN CAUTION ISO14001...
  • Page 2 CCTV CCTV *2.97mm Fixed Board Lens 5. Specifications 3. Dimension MODEL 46322.003 Image Sensor 1/2.8" SONY 2Mega C-MOS Sensor Scanning System progressive 25fps High Speed 1/25~ 1/60.000 sec, AUTO ShutterResolution 1080P Pixels - total 2010(H) X 1092(V) 2.22Mega Pixel Pixels - Effective 1944(H) X 1092(V) 2.12Mega Pixel Sensitivity Colour 0.5 Lux @ F1.2 , 0.01 Lux(SENS-UP X64)