Troubleshooting - SOLIS SOL8930 Instruction Manual

SOL8930 Automatic Coffee Machine
Instruction Manual
Page 19 of 20

TROUBLESHOOTING

PROBLEM
The appliance does not
work.
No or delayed response
after several attempts of
pressing the function keys
on the panel.
The coffee is not hot
enough.
The coffee cannot come
out from the spout.
The first cup of coffee is of
poor quality.
Coffee has no cream.
The touch buttons are not
sensitive.
The appliance takes too
long time to warm up.
The water tank has been
removed / the water level
is very low in the water
tank but shows no
alert.
The internal drip tray is
filled with a lot of water.
The coffee is delivered too
slowly or a drop at a time.
Lack of bean indicator
flashes but there are still a
lot of coffee beans inside
the container.
CAUSE
The appliance is
connected to the mains.
- The appliance is under an
electromagnetic
interference.
- Dirt on the panel
- The cups have not been
preheated.
- The brewing unit is too
cold.
The empty system function
might have been
before.
The first run of the grinder
does not pour a sufficient
quantity of coffee power
into the brewing unit.
Coffee beans are not fresh. Change or use an appropriate brand of coffee
Not pressing the
button from the
direction of the appliance.
Excessive scale has built
up.
The area near the water
tank connector is wet.
The coffee powder is too
fine, which blocks the water
from coming out.
The coffee powder is too
fine which blocks the water
from coming out.
The internal coffee powder
outlet is blocked.
SOLUTION
not - Plug in and press the switch.
- Check the cable and the plug.
- Unplug the appliance. Restart after a few
minutes.
- Clean the panel with the cloth provided.
- Rinse the appliance at least 3 times before
making the coffee.
Press the hot water button until water can
used come out from spout.
Throw the coffee away. The other coffees
will always be of good quality.
beans.
touch Press the lower bottom part of the icon of the
front touch button from the front direction of the
appliance.
Descale the appliance.
Wipe the water around the water tank
connector.
Adjust the coffee fineness to a bigger dot
during grinder operation.
Adjust the coffee fineness to a bigger dot
during grinder operation.
Follow the steps of section E (V. Cleaning
coffee powder outlet).