Safety Instructions - Epson MOVERIO BT-45C User Manual

• Observe the safety precautions, use precautions, and all other safety
precautions provided with the smart device or the dedicated controller.
Note the following points when using headset speakers or
earphone microphones.
• Do not start using this product at a high volume. Doing so may
result in hearing impairment.
• Lower the volume before turning off the product, and gradu-
ally increase the volume after turning on the product. To
prevent possible hearing damage, do not listen at high volume
for prolonged periods of time.
Using the headset speaker volume amplification feature provided by
MOVERIO Link/MOVERIO Link Pro and listening for prolonged periods
at a volume that exceeds the recommended level may result in hearing
impairment.
Do not allow any conductive foreign objects to touch the USB Type-C
connector or the earphone jack, and do not put any conductive foreign
objects into the connection ports. Doing so may cause a short circuit and
result in fire or electric shock.
Do not allow solvents such as alcohol, benzene, or thinner to touch the
product. Also, do not clean this product with a wet cloth or solvents. Do-
ing so may warp or crack the product housing and may result in electric
shock, malfunction, or fire.
The product housing should only be opened by qualified service person-
nel. Also, do not disassemble or remodel the product (including consum-
able items). Many of the parts inside the product carry a high voltage and
could cause fire, electric shock, accident, or poisoning.
Do not subject the lens of the product to strong shocks or knock it against
hard objects. If the lens is damaged, it could splinter and cause serious
injuries to the eyes and face.
Do not throw the product into a fire and do not heat the product. Do not
place objects with open flames, such as candles, on this product. Doing
so may result in heat, fire, or explosion.
<When using this product for medical purposes>
1) This product is not certified as a medical device as defined by acts
regarding medical products and medical devices It can be used as an
auxiliary monitor for the main monitor attached to medical devices, but
do not use it for surgery or when determining diagnostic images that
require high reliability.
2) This product has not been certified by the IEC60601-1 standard. When
this product is incorporated into a medical system, the entire system
must conform to the standard requirements.
Warning
Viewing image precautions
Do not wear this product while driving a car, riding a motor bike or
bicycle, or performing any other dangerous tasks. Doing so may result in
accident or injury.
Do not use this product in unstable locations such as stairs or at altitude.
Also, do not use this product while walking in dangerous locations such
as near machinery or equipment that might get caught on the cables,

Safety Instructions

5