Table of Contents
Advertisement
Maintenance
01_Chapter title
01_Head A
Cleaning the Headset
• If you can see marks in the image or if the image is hazy, check
02__lead
that there is no dirt, dust, or fingerprints on the lenses.
If there is dust or dirt on the lenses, wipe them carefully with
the included cloth for cleaning glasses.
When wiping the lenses, do not use lens cleaning
liquids or organic solvents.
• If the camera is dirty, wipe it carefully with a soft cloth.
• If any parts other than the lens or camera are dirty, wipe them
with a wet tissue.
Storing the Headset
• When storing the headset, place it in the dedicated carrying
case.
• When placing the headset, make sure it is placed horizontally
so that it does not touch against hard objects. If the headset
is placed with the lens facing down and the lens touches hard
objects, the lens could be damaged.
Cleaning the Connector ports
• If the connectors on the interface box are dirty or if there are
foreign objects stuck to them, they may not work correctly.
Wipe away any dirt with a dry cloth or cotton swab at least
once every three months.
Caution
• Do not damage the connector ports with your finger or a hard
object.
• Do not expose the connector ports to water. When cleaning
the connector ports, use a dry cloth or a cotton swab.
Replacing the Front Pad
• Remove the front pad from the headband and replace it.
25
Advertisement
Table of Contents
