Related Manuals for Epson MOVERIO BT-45C
Summary of Contents for Epson MOVERIO BT-45C
- Page 1 User's Guide Information on the MOVERIO Website © 2022 Seiko Epson Corporation 2022.07 414280000 EN Provides useful tips and support information. https://tech.moverio.epson.com/en/...
-
Page 2: Table Of Contents
Contents Safety Instructions ........4 Specifications . - Page 3 Manual Organization This guide provides information on safely using this product, basic operating methods, and troubleshooting. User's Guide Make sure you read this guide before using the product. Start Guide* Explains procedures for using this product for the first time. * Not available in all regions.
- Page 4 01_Chapter title Safety Instructions 01_Head A For your safety, read the documents carefully to use the product correctly. humidity such as in a bath or shower. Failure to comply with these pre- After you have read the documents, keep them in a safe place so that you cautions could result in fire or electric shock.
-
Page 5: Safety Instructions
Safety Instructions • Observe the safety precautions, use precautions, and all other safety Do not subject the lens of the product to strong shocks or knock it against precautions provided with the smart device or the dedicated controller. hard objects. If the lens is damaged, it could splinter and cause serious injuries to the eyes and face. - Page 6 In the following situations, unplug the power supply cable, and contact surroundings. If you are too focused on the image, it could result in ac- your local dealer or the Epson service call center. Continuing to use under cidents, falling down, or colliding with other people.
- Page 7 Safety Instructions Caution Caution Product usage precautions Viewing image precautions Since the headset, headband, shade, interface box, and interface box Always take periodic breaks when viewing images using this product. holder use powerful magnets, be sure to note the following points. Long periods of viewing images may result in eye fatigue.
- Page 8 Safety Instructions North America and Latin America: This product must not be used by • When using this product, make sure that there are no issues such as the strength of the shade and headset attachments, scratches, cracks, break- children under the age of thirteen as their eyesight is still developing. age, or deformation of the lens surface.
-
Page 9: Notes On Usage
01_Chapter title Notes on Usage 01_Head A This product uses an Si-OLED (Organic EL Panel) for the display panel. Due • This product operates using the battery of the to the general characteristic of the Si-OLED, you may notice burn-in (after- connected smart device or dedicated controller images) or decreasing luminance on the panel. - Page 10 01_Chapter title Included Items 01_Head A Headset Helmet attachment bracket ➡ "Headset - Headband" p.12 ➡ "Attaching to the helmet and 02__lead wearing" p.17 Headband (attached at time of pur- Interface box holder (for attaching chase) helmet) ➡ "Headset - Headband" p.12 ➡...
-
Page 11: Included Items
Included Items Optional items The BO-IC400N controller and the other items shown below are only included with the BT-45CS. For more information about the BO-IC400N, see the "BO- IC400N User's Guide". Shade Pack (BO-SP450) Dedicated controller (BO-IC400N) Headband Pack (BO-IP450) SD card slot pin USB cable... - Page 12 01_Chapter title Part Names and Functions 01_Head A Headset - Headband 02__lead The headband is attached to the headset at the time of purchase. Check the following when attaching the product to a helmet. ➡ "Attaching to the helmet and wearing" p.17 Angle adjustment part (2 axes) Overhead strap Adjusts the angle of the headset.
-
Page 13: Part Names And Functions
Part Names and Functions Front pad Rear pad Supports the headband on your forehead. Supports the headband at the back of This can be removed and replaced. your head. Interface box You can use the magnet on the box to attach/detach it. - Page 14 01_Chapter title Wearing the Headset 01_Head A Attaching to the headband and wearing 02__lead Follow the steps below when using the headband. If you are using a shade, attach it to the headset beforehand. Secure the cable with the cable clip. Connect to the dedicated controller (BO-IC400N) or smart device.
-
Page 15: Wearing The Headset
Wearing the Headset Place the front pad on your forehead and the rear pad at Turn the adjustment wheel to adjust the size of the head- the back of your head. band. If necessary, adjust the length of the overhead strap. - Page 16 Wearing the Headset When you need to shift the headset to get a better view, Move the angle adjustment part with both hands to move the angle adjustment part to raise the headset up. adjust the angle of the headset so that you can see the image.
-
Page 17: Attaching To The Helmet And Wearing
Wearing the Headset Attaching to the helmet and wearing Follow the steps below when using a helmet. You may not be able to attach the product depending on the shape of the helmet. The product cannot be attached to MP type helmets. - Page 18 Wearing the Headset Remove the interface box from the headband. Remove the screws (M3) from the angle adjustment part, and slide the headband toward you to remove it.
- Page 19 Wearing the Headset Attach the helmet attachment bracket to the headset Turn the adjustment screw on the helmet attachment with the screws (M3). bracket to securely attach the headset to the helmet. Align the adjustment screw with the center of the brim of the helmet, and insert the tip of the brim all the way in to secure it.
- Page 20 Wearing the Headset Attach the interface box to the interface box holder and Connect to the dedicated controller (BO-IC400N) or secure the cable with the cable clip. smart device. When using an earphone microphone, con- nect it to the earphone jack on the interface box. USB Type-C Make sure the top and bottom of the interface box are correct before attaching it.
- Page 21 Wearing the Headset Wear the helmet and adjust the position of the headset Move the angle adjustment part of the helmet attach- by moving the slider on the helmet attachment bracket ment bracket to adjust the headset so that you can see back and forth.
-
Page 22: Wearing Over Glasses
Wearing the Headset Wearing over Glasses Using the Shade The headset can be worn over glasses. You can use the magnet on the shade to attach/detach it. • Make sure that you do not damage the glasses and the lens of the headset when wearing. •... - Page 23 The following website provides information on app develop- Computers and smart devices with 02__lead ment and firmware updates for this product. Supported USB Type-C ports that support equipment DisplayPort Alternate Mode on USB https://tech.moverio.epson.com/en Type-C Movie dis- Resolution 1920 x 1080 (60 Hz) play (frame rate) EDID...
-
Page 24: Dedicated App
Dedicated app Dedicated app MOVERIO Link/MOVERIO Link Pro If you are using an Android device, you can adjust the head- set's screen brightness and other features with the dedicated app. BT-45C : Install the "MOVERIO Link" app on your smart device using Google Play. - Page 25 01_Chapter title Maintenance 01_Head A Cleaning the Headset Cleaning the Connector ports • If you can see marks in the image or if the image is hazy, check • If the connectors on the interface box are dirty or if there are 02__lead that there is no dirt, dust, or fingerprints on the lenses.
- Page 26 01_Chapter title Troubleshooting 01_Head A Has a malfunction occurred? If you think a malfunction has earphone microphones with a switch. occurred, check the following. Compass is not accurate 02__lead No image is displayed • If the compass is inaccurate for apps that use the headset's geomagnetic sensor, you can correct it by moving the headset •...
- Page 27 01_Chapter title Specifications 01_Head A Product Specifications 02__lead <BT-45CS users: See the "BO-IC400N User's Guide" for product specifications for the supplied controller.> Model number BT-45C (H970A) Display method Si-OLED Panel size 0.453" wide panel (16:9) Resolution 1920 x 1080 pixels Angle of view Approximately 34 degrees (diagonally) Virtual screen size...
-
Page 28: Specifications
Specifications 01_Chapter title 01_Head A Sensors geomagnetic sensor/accelerometer sensor/gyroscopic sensor/ambient light sensor Power USB Type-C USB Power Delivery 02__lead Rated electricity consumption 7.5 W Rated output voltage/current 5.0V/1.5 A Operating temperature 5 to 35°C (41 to 95°F) humidity 20 to 80% (no condensation) Storage temperature -10 to 60°C (14 to 140°F) humidity 20 to 90% (no condensation) Dust and water resistance... - Page 29 Specifications 01_Chapter title 01_Head A Appearance 02__lead H (a) H (b) D (b) W (a)(b) D (a) Headset and headband (a) Headset (b) 202 (8.0) 202 (8.0) 290 (11.4) (maximum) 110 (4.3) 111 (4.4) 34 (1.3) Units: mm / (inches)
- Page 30 Specifications 01_Chapter title 01_Head A Helmet attachment bracket 37 (1.5) 02__lead 63 (2.5) 55 (2.2) Units: mm /(inches) Interface box 61 (2.4) 17 (0.7) 35 (1.4) Units: mm/(inches) Interface box holder 75 (3.0) 22 (0.9) 34 (1.3) Units: mm /(inches)
- Page 31 02__lead Trademarks "EPSON" is a registered trademark of the Seiko Epson Corporation. "EXCEED YOUR VISION" is a registered trademark or a trademark of the Seiko Epson Corpo- ration. Windows is a registered trademark of the Microsoft Corporation in the USA and other countries.
- Page 32 01_Head A Restrictions on Use This product has been manufactured according to the specifications of the country in which it is sold. Contact your nearest Epson dealer when us- ing this product outside of the country in which it is sold.
-
Page 33: General Notes
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numèrique de la classe B est conforme à la norme NMB-003 du Canada. Indication of the manufac- Manufacturer: SEIKO EPSON CORPORATION Importer: EPSON EUROPE B.V. turer and the importer in... -
Page 34: List Of Safety Symbols And Instructions
General Notes List of Safety Symbols and Instructions Approved No. Symbol Mark Description Standards IEC60417 Indoor use only The following table lists the meaning of the safety symbols la- No.5957 Indicates that the electronic beled on the equipment. equipment or device is intended for indoor use only. - Page 35 General Notes Approved No. Symbol Mark Description Standards IEC60417 Class II equipment No.5172 Indicates that the equipment or device conforms to the safety requirements as specified for Class II equipment in JIS C 9335-1/JIS C 8105-1. ISO 3864 General prohibitions Indicates a general, non-specific prohibition notice.
- Page 36 A more up-to-date contact address can be obtained from the corresponding website listed here. If you do not find what you 02__lead need on any of these pages, please visit the main Epson home page at www.epson.com. EUROPE, MIDDLE EAST & AFRICA...
-
Page 37: Contact List
Contact List ISRAEL ITALY KAZAKHSTAN LATVIA Epson Israel Epson Italia s.p.a. Epson Kazakhstan Rep. Office Epson Service Center Latvia https://www.epson.co.il https://www.epson.it http://www.epson.kz https://www.epson.lv LITHUANIA LUXEMBURG NORTH MACEDONIA NETHERLANDS Epson Service Center Lithuania Epson Europe B.V. Digit Computer Engineering Epson Europe B.V. - Page 38 U. S. A. Epson Canada, Ltd. Epson America, Inc. https://epson.ca https://epson.com/usa ASIA & OCEANIA AUSTRALIA CHINA HONG KONG INDIA Epson Australia Pty. Ltd. Epson (China) Co., Ltd. Epson Hong Kong Ltd. Epson India Pvt., Ltd. https://www.epson.com.au https://www.epson.com.cn https://www.epson.com.hk https://www.epson.co.in INDONESIA JAPAN...
- Page 39 Contact List NEW ZEALAND PHILIPPINES SINGAPORE TAIWAN Epson New Zealand Epson Philippines Co. Epson Singapore Pte. Ltd. Epson Taiwan Technology & Trad- ing Ltd. https://www.epson.co.nz https://www.epson.com.ph https://www.epson.com.sg https://www.epson.com.tw THAILAND Epson (Thailand) Co.,Ltd. https://www.epson.co.th...