Advertisement
OPERATION
Placement
Place the air purifier on dry, stable, flat surface. Ensure there is at least a 30cm clearance
around the back and sides, and a 50cm clearance above the air purifier.
Powering on/off
Plug the power cord of the air purifier into the power socket, then turn the socket on.
The air purifier will emit a sound before the LED light and display panel flashes once. This
will indicate the air purifier has entered standby.
Press the power button to turn the air purifier on/off.
Modes
This air purifier features four modes:
• Auto – The air purifier will automatically adjust the fan speed to regulate the air
quality to ideal levels.
• Sleep – The air purifier will operate at a lower noise level, ideal when sleeping.
• Mid – The air purifier will operate at a medium intensity.
• High – The air purifier will operate at a high intensity.
When turned on, the air purifier will operate in auto mode. This will be indicated by the
mode indicator on the display panel.
The LED light will also illuminate a colour to reflect the air quality measured by the amount
of PM
particles µg/m³. The lower the number, the less pollutants there are in the air. This
2.5
is shown as below.
6
PM
µg/m³
LED light colour
2.5
0–75
Blue
76–150
Yellow
> 151
Red
Advertisement
