Kogan Kapuriohepa User Manual

Ionic home air purifier tower

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for Kogan Kapuriohepa

  • Page 2: Table Of Contents

    TABLE OF CONTENTS IMPORTANT SAFEGUARDS……………………………...…..……..1 MAIN PARTS…………………………………………………………………2 OPERATION………………………………………………………………….3 PRE-OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS CLEANING AND MAINTENANCE……………………………..……5 CLEANING PRE-FILTER…………………………………………..5 CLEANING HEPA FILTER…………………………………………6 REMOVING/INSTALLING UV LAMP…………………………..8 CLEANING AND MAINTENANCE……………………………..11 TROUBLE-SHOOTING………………………………………….………11...
  • Page 3: Important Safeguards

    READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. WARNING: RISK OF ELECTRICAL SHOCK • Safety precautions should always be used when operating this or any electrical appliance. • Decrease the risk of electrocution, electric shock, injury or fire by reading and following all of the warnings below. •...
  • Page 4: Main Parts

    Note: Before operating the air purifier, make sure the air filters inside the air purifier are not wrapped in plastic. When the air purifier is plugged in you should hear a beep. Press the Power button to turn it on. If the air purifier does not power on, ensure the front cover is installed correctly.
  • Page 6 4. Pressing Fan Speed Button ( ) at this point will set the air purifier into Medium fan speed ( 5. Pressing Fan Speed Button ( ) again will set the air purifier into Low fan speed ( 6. Pressing Fan Speed Button ( ) once more will set the air purifier back to High fan speed ( 7.
  • Page 7: Cleaning And Maintenance

    CLEANING AND MAINTENANCE CLEANING PRE-FILTER (See Air Cleaning System) 1. Turn off and unplug the unit; 2. Press the Lock & Release Button and remove the Rear Cover from the unit; NOTE: The unit will shut off after the rear cover is removed. - 5 -...
  • Page 8: Cleaning Hepa Filter

    3. Remove the pre-filter from the rear cover. Clean the pre-filter with the vacuum brush attachment of your vacuum cleaner. This will remove lint and dirt from the filter. Use a clean, damp, soft cloth to wipe the pre-filter again. NOTE: Clean the pre-filter often if possible.
  • Page 9 3. Remove the HEPA filter. 4. Use the brush attachment with your vacuum cleaner to clean the filter. CAUTION: Do not use water or any household cleaner to clean the HEPA filer. NOTE: The HEPA filter can be used continuously for up to two years. When the HEPA filter turns from white to black, it should be replaced with a new one.
  • Page 10: Removing/Installing Uv Lamp

    5. Depending upon your filter type, either it will only fit in one way or reference the arrow on the side of the filter. Install the rear cover back to unit and securely latch in place. NOTE: Both of filter and rear cover must be installed otherwise the purifier will not power on.
  • Page 11 3. Remove the HEPA filter. 4. Use a screwdriver to remove the two screws and detach the UV lamp cover. - 9 -...
  • Page 12 CAUTION: The UV lamp is a glass product, please handle it carefully. Please reference www.kogan.com for more information in regards to the safest way to replace the UV lamp. 6. Take a new UV lamp and insert it into the lamp socket. Simply press in on the end of the glass lamp to lock into place.
  • Page 13: Cleaning And Maintenance

    4. Check to be sure the rear cover is latched firmly in place. NOTE: IF YOU CONTINUE TO EXPERIENCE A PROBLEM, PLEASE CONTACT THE THE KOGAN CUSTOMER SUPPORT TEAM IN REGARDS TO THE WARRANTY. DO NOT ATTEMPT TO TAKE APART THE UNIT BY YOURSELF. DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE PRODUCT OR PERSONAL INJURY.

Table of Contents