Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (the Wi-Fi
indicator will be flashing slowly).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by pressing and holding the mode button for two seconds until the Wi-Fi
indicator is flashing slowly.
Add device through network
1.
Once registered, tap 'Add Device' on the app's home page, or the '+' in the upper
right corner, to add a new device through the network.
2.
Select the product type from the list of options in the app (Air Treatment > Air
Purifiers).
3.
Adjust your connection method by tapping on the mode type in the top-right
corner of the screen. Select 'AP Mode' for the set-up type.
4.
Ensure that the device is in pairing mode, with the Wi-Fi indicator flashing slowly,
and tap 'Confirm light is slowly flashing'.
5.
Enter your Wi-Fi details. It is important that your SmarterHome™ device and the
app are connected to the same Wi-Fi network during setup.
Notes:
• The device and the app have to use the same Wi-Fi network.
• The device is only compatible with 2.4Ghz networks.
9
Advertisement
