• Do not place the air purifier under an air conditioner to prevent condensation from dripping into the air purifier. • If the power cord is damaged, stop use immediately and contact help.Kogan.com for assistance. • Adult supervision is required if children are cleaning the air purifier.
OPERATION Placement Place the air purifier on dry, stable, flat surface. Ensure there is at least a 30cm clearance around the back and sides, and a 50cm clearance above the air purifier. Powering on/off Plug the power cord of the air purifier into the power socket, then turn the socket on. The air purifier will emit a sound before the LED light and display panel flashes once.
Page 7
UV/Anion button This air purifier can use either UV light or anions to remove bacteria and other pollutants in the air. To set whether the air purifier uses UV light or anions, press the UV/Anion button. The relevant UV or anion indicator will illuminate on the display panel to reflect this. Note: If UV light is being used, the air purifier will intermittently operate it every two hours.
CONNECT TO SMARTERHOME™ APP This air purifier can connect to the Kogan SmarterHome™ app in three different ways. • AP mode • EZ mode • Bluetooth AP mode connection Install App Download the ‘Kogan SmarterHome’ app from the Play Store (Android) or App Store (iOS).
Page 9
Set device in pairing mode When the device is first turned on, it may automatically enter pairing mode (the Wi-Fi indicator will be flashing slowly). If not automatically in pairing mode when powered on, you can manually set the device in pairing mode by pressing and holding the mode button for two seconds until the Wi-Fi indicator is flashing slowly.
Page 10
6. Follow the in-app prompts to continue AP Mode connection, which will pair your mobile phone to the device’s Wi-Fi hotspot to ensure a connection. This may be named ‘SL-KoganSmart’, ‘SmartLife-XXXX’, or another similar name. Note: If the Wi-Fi hotspot does not appear on your phone in the list of available networks, your device may not be set in AP Pairing Mode correctly.
Page 11
Having trouble connecting? The prior steps detail the process for ‘AP Mode’ connection. If that does not work for your connection, we suggest trying it again, and if still no success, attempting the following method for EZ Mode connection. Set device in EZ pairing mode Set the device in pairing mode by pressing and holding the mode button for two seconds again until the Wi-Fi indicator starts flashing rapidly.
Page 12
4. Ensure that the device is in pairing mode, with the Wi-Fi indicator flashing rapidly, and tap ‘Confirm light is rapidly flashing’. 5. The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close until connection is complete.
Page 13
Bluetooth connection Install App Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS). Play Store (Android) App Store (iOS) To register: 1. If you already have a SmarterHome account, select ‘Log In’. To register a new account, select ‘Sign Up’.
Page 14
Set device in pairing mode When the device is first turned on, it may automatically enter pairing mode (Wi-Fi indicator will be flashing rapidly). If not automatically in pairing mode when powered on, you can manually set the device in pairing mode by pressing and holding the mode button for two seconds until the Wi-Fi indicator is flashing rapidly.
Page 15
5. Ensure that the device is in pairing mode, with the Wi-Fi indicator flashing rapidly, and tap “Confirm light is rapidly flashing”. 6. The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close until connection is complete.
å CLEANING & CARE Ensure the air purifier is turned off and unplugged before cleaning. • Remove the filter and take it outdoors to a well-ventilated area. Gently pat the dust off the outer surface of the filter. The filter should be regularly put under direct sunlight to sterilise bacteria.
Page 17
To replace the filter: 1. Turn off the air purifier and unplug the power cord from the power socket. 2. Open the back cover. 3. Remove the filter. 4. Remove the packaging from the new filter (not included). Packing bag 5.
Page 18
6. Reinstall the back cover. 7. After replacing the filter, plug the power cord of the air purifier into the power socket, and press the power button. The display panel will still show the indicator that the filter has finished its service life, and the LED light will still be flashing yellow. Press and hold the mode button for seven seconds and the display will show the ‘Filter 100%’...
The yellow LED light will disappear, new filter has been and the filter timer will be reset. installed. If the troubleshooting solutions above do not solve your issues, contact help.Kogan.com for assistance. Do not disassemble the air purifier yourself.
Page 24
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...