Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Kogan SMARTERHOME KABLFAN1CSA
Summary of Contents for Kogan SMARTERHOME KABLFAN1CSA
- Page 1 KOGAN SMARTERHOME™ BLADELESS PURIFIER FAN (KABLFAN1CSA)
-
Page 2: Table Of Contents
Safety & Warnings Overview Before first use Operation Connection to SmarterHome™ App Google Home Control Amazon Alexa Control Cleaning & Care Specifications... -
Page 3: Safety & Warnings
SAFETY & WARNINGS Ensure to read all instructions and warnings in this user guide prior to first use. Retain this user guide for future reference. • This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product in a safe way by the person responsible for their safety, and understand the hazards involved. - Page 4 WARNING — KEEP BATTERIES OUT OF REACH OF CHILDREN • Swallowing may lead to serious injury or death in as little as 2 hours, due to chemical burns and potential perforation of the oesophagus. • If you suspect your child has swallowed or inserted a button battery immediately call the 24-hour Poisons Information Centre on 13 11 26 (Australia) or 0800 764 766 (New Zealand) for fast, expert advice.
-
Page 5: Overview
OVERVIEW Air outlet Air duct Air duct Top cover of Top cover of air purifier air purifier filter filter Air inlet Air inlet Touch screen Host button Power connection Base AC Adaptor... -
Page 6: Before First Use
BEFORE FIRST USE Keep away from curtains • Please use the fan on a flat platform. Do not place the fan in an unstable place, such as an inclined or soft surface, to avoid damage or malfunctions caused by the fan tipping over. - Page 7 Installation and replacement method of air cleaning filter: Turn the filter system top cover Disconnect the old filter from the top cover. counterclockwise to unlock and remove the filter. The new filter and top cover are After assembling, put it back in the attached and assembled with a main unit and turn it clockwise to buckle.
-
Page 8: Operation
OPERATION Remote Control Swing: Power button: Start & Stop Swing Turn the fan on/off Increase airflow (+) Max mode: Decrease airflow (–) Maximum power 9-speed levels to Strong airflow choose from Quiet mode: Sleep timer: Soft & Smooth airflow 1-8 hours of timed shutdown The device can be switched on and off by pressing the “ON &... - Page 9 Press the timer button on the remote control to set 1 to 8 hours. Press the timer button on the remote control, the display shows: “0” to cancel the timer. After the timer function is set, other functions can be used normally. When the device is turned off, the timing setting is also cancelled.
- Page 10 Signal receiver Known troubleshooting issues: This fan may respond to the remote control of other devices. If you use the remote control of this fan, other devices may respond. This is due to the overlapping frequencies of the remote control. There is no quality problem in the product itself.
- Page 11 Host Operation Installing on Wind Kreis Set the wind outlet after fan has stopped. Hold fan body with one hand and set the wind outlet 15° before and after. Switch on and off Connect the power supply, the LED display lights up and the machine goes into standby mode.
-
Page 12: Connection To Smarterhome™ App
Install App Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS). Register If you do not have a Kogan SmarterHome™ account, register or sign in with a verification code sent by SMS. To register: Tap to enter registration page. - Page 13 Set device in pairing mode When the device is first turned on, it may automatically enter pairing mode (the touch screen display will be flashing “F”). If not automatically in pairing mode when powered on, you can manually set the device in pairing mode by pressing and holding the touch screen button for 5 seconds until you hear three beeps and the touch screen display begins flashing “F”.
- Page 14 Upon successfully confirming pairing mode, enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup. The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™...
- Page 15 AP mode connection steps Set device in pairing mode To set the device for AP mode pairing, press and hold the touch screen button for an additional 5 seconds until it beeps another three times. The touch screen display will flash “F”...
- Page 16 Select “AP Mode” for the set-up type. Ensure that the device is in pairing mode, with the Wi-Fi light indicator flashing slowly, and tap “Confirm light is slowly flashing”. Enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup.
- Page 17 10. Follow the in-app prompts to continue AP Mode connection, which will pair your mobile phone to the device’s Wi-Fi hotspot to ensure a connection. Note: If the Wi-Fi hotspot does not appear on your phone in the list of available networks, your device may not be set in AP Pairing Mode correctly.
-
Page 18: Google Home Control
From the home page of the Google Home app, select the “+” icon to access the ‘Add and manage’ page. Select ‘Set up device’, then under the Works with Google banner, select ‘Have something already set up?’ Select the search bar and type ‘Smarter Home’ to locate the Kogan SmarterHome™ service. - Page 19 Tap ‘Authorise’ to grant Google permission to access the SmarterHome™ app and your devices. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
- Page 20 Tap on any of the devices to view a list of available commands. Note: Please note that Google Home can only control the base/core functions of any compatible SmarterHome™ devices. To make full use of this product’s smart functionality, please use the Kogan SmarterHome™ app.
-
Page 21: Amazon Alexa Control
AMAZON ALEXA CONTROL Note: You will need to have set up an Alexa account prior to linking your Kogan SmarterHome™ device. Adding “SmarterHome” to the Alexa app From the home page of the Alexa app, select the “ ” icon in the top-right and select Skills &... - Page 22 Tap ‘Enable to Use’ to add the Kogan SmarterHome™ skill to Alexa. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
- Page 23 SmarterHome™ account. When your devices have successfully connected to the Alexa app, you will be able to control your Kogan SmarterHome™ devices via Alexa’s voice commands. Note: Please note that Alexa can only control the base/core functions of any compatible SmarterHome™...
-
Page 24: Cleaning & Care
CLEANING & CARE Before maintenance work, pull the mains plug out of the socket. Surface Gently wipe the fan surface with a soft, dry cloth If the surface of the fan is dirty, dilute it with a mild detergent and wipe the surface of the fan with a soft cloth. -
Page 25: Specifications
SPECIFICATIONS Operating voltage/ 100-240V~ 50/60Hz Rated frequency Oscillation 80 ± 5° Size 235x230x592mm Rated Voltage Timer 1-8H Rated power Weight 2.84kg... - Page 26 NOTES...
- Page 28 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...