Table of Contents
Advertisement
OPERATION
When connected to the power socket, a beep will sound for one second, and the machine
enters pre-processing mode. The light ring will cycle blue, cyan, green, yellow, red, purple
and after 30 seconds of pre-processing, the colour corresponding to the current air quality
will be displayed.
Power Button
1.
Touch the power button to turn on the machine. The appliance will beep once and
the High mode of wind speed indicator illuminates.
2.
Touch the button again a beep will be heard, and the machine will turn off.
Wind Speed Button
1.
When the unit is powered on, press the wind speed button and a beep will be
heard. The wind speed will cycle between Sleep-High-Auto and the corresponding
indicator light will illuminate.
2.
When set Sleep, the fan will run at low wind speed; when turning to High, the fan
will run at high wind speed. When turning to Auto, the wind speed will
automatically adjust according to air quality.
3.
When the air quality is poor, the wind speed is automatically adjusted to the high
mode and the light ring will illuminate red. When the air quality is normal, the wind
speed is automatically adjusted to the mid mode, and the light ring will illuminate
yellow. When the air quality is excellent, the wind speed is automatically adjusted
to the low mode and the light ring will illuminate blue.
Notice: Touch the wind speed button, the night light will white gradient for about 3 seconds.
In the sleep mode, if no buttons are pressed for 5 seconds, all lights turn off until a button is
pressed again.
Advertisement
Table of Contents
