Table of Contents
Advertisement
OPERATION
Placement
Place the tower fan upright on a flat stable surface. Ensure there is at least a 30cm
clearance between walls and any obstructions.
Keep the fan heater away from curtains as they may obstruct airflow and cause the fan
heater from working optimally.
Note:
Do not place the fan on an inclined or soft surface as this could cause the tower fan
to fall and be damaged.
Switching on and off
• Connect one end of the AC adapter into the power connector on the fan. Insert the
plug into a power socket (100 – 240V) and switch it on. The LED display will light up and
the tower mode will enter standby.
• To turn on, press the power button ' '. The fan will beep once and begin operating.
• To turn off, press and hold the power button ' ' for 2 seconds. The fan will beep twice
and stop operating.
7
Advertisement
Table of Contents
