Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (Wi-Fi indicator
will be flashing rapidly).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by pressing and holding the mode button for two seconds until the Wi-Fi
indicator is flashing rapidly.
Add device through network
1. Once registered, tap "Add Device" on the app's home page, or the "+" in the upper
right corner, to add a new device through the network.
2. Select the product type from the list of options in the app (Air Treatment > Air
Purifiers).
3. Enter your Wi-Fi details. It is important that your SmarterHome™ device and the app
are connected to the same Wi-Fi network during setup.
Notes:
•
The device and the app have to use the same Wi-Fi network.
•
The device is only compatible with 2.4Ghz networks.
14
Advertisement
